技術文章 » 離線方式安裝高可用RKE2 (版本: v1.22.13+rke2r1)記錄

離線方式安裝高可用RKE2 (版本: v1.22.13+rke2r1)記錄

2022-09-03 21:01:48

說明：

  1. 想要了解RKE2可以到官網(https://docs.rke2.io 或 https://docs.rancher.cn/docs/rke2/_index/)看最新資料
  2. 用官網給出的離線安裝(https://docs.rke2.io/install/airgap/)方式可能有坑, 節點拉起時安裝網路外掛必須使用到網路,沒有網路節點一直時Notready的狀態, 有可能也和我部署的版本有關係, 大家也可以跳過給containerd設定的步驟,直接部署試試
  3. rke2-images.linux-amd64.tar.zst,rke2.linux-amd64.tar.gz,sha256sum-amd64.txt下載地址見 https://github.com/rancher/rke2/releases
  4. 如果發現有啥錯誤,歡迎評論區打擾

初始化節點

設定主機名資訊，新增本地hosts解析

hostnamectl set-hostname rke2-master-default-loadblance
hostnamectl set-hostname rke2-master-default-nodepool-1
hostnamectl set-hostname rke2-master-default-nodepool-2
hostnamectl set-hostname rke2-master-default-nodepool-3
hostnamectl set-hostname rke2-node-default-nodepool-1
hostnamectl set-hostname rke2-node-default-nodepool-2
hostnamectl set-hostname rke2-node-default-nodepool-3
hostnamectl set-hostname rke2-node-default-nodepool-4

修改所有節點hosts

172.17.0.50  rke2-master-default-loadblance
172.17.0.51  rke2-master-default-nodepool-1
172.17.0.52  rke2-master-default-nodepool-2
172.17.0.53  rke2-master-default-nodepool-3
172.17.0.54  rke2-node-default-nodepool-1
172.17.0.55  rke2-node-default-nodepool-2
172.17.0.56  rke2-node-default-nodepool-3
172.17.0.57  rke2-node-default-nodepool-4

重新生成機器ID並重啟

cp -rf /dev/null /etc/machine-id
systemd-machine-id-setup
reboot

所有節點安裝需要的包

systemctl stop firewalld; systemctl disable firewalld; systemctl stop dnsmasq; systemctl disable dnsmasq; systemctl stop ntpd; systemctl disable ntpd; systemctl stop postfix; systemctl disable postfix;
iptables -F && iptables -X && iptables -F -t nat && iptables -X -t nat && iptables -P FORWARD ACCEPT
swapoff -a; sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab; 
setenforce 0
sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config
yum -y install epel-release; yum -y install chrony curl wget vim sysstat net-tools openssl openssh lsof socat nfs-utils conntrack ipvsadm ipset iptables sysstat libseccomp; systemctl disable rpcbind

調整limit

cat >> /etc/security/limits.conf << EOF
* soft nproc  65535
* hard nproc  65535
* soft nofile 65535
* hard nofile 65535
EOF

調整NetworkManager

cat >>  /etc/NetworkManager/conf.d << EOF
[keyfile]
unmanaged-devices=interface-name:cali*;interface-name:flannel*
EOF

升級核心

curl -LO https://storage.corpintra.plus/elrepo/kernel/kernel-lt-5.4.134-1.el7.elrepo.x86_64.rpm
curl -LO https://storage.corpintra.plus/elrepo/kernel/kernel-lt-devel-5.4.134-1.el7.elrepo.x86_64.rpm
yum install kernel-lt-* -y
grub2-set-default  0
grub2-mkconfig -o /etc/grub2.cfg
grubby --default-kernel 
reboot

匯入ipvs模組

cat > /etc/modules-load.d/ipvs.conf << EOF
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
nf_conntrack
br_netfilter
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
overlay
EOF

systemctl enable --now systemd-modules-load.service

修改核心並重啟所有節點

cat >  /etc/sysctl.d/kubernetes.conf <<EOF
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_intvl = 30
net.ipv4.tcp_keepalive_probes = 10
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1
net.ipv4.neigh.default.gc_stale_time = 120
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_announce = 2
net.ipv4.ip_forward = 1
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 1024
net.ipv4.tcp_synack_retries = 2
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-arptables = 1
net.netfilter.nf_conntrack_max = 2310720
fs.inotify.max_user_watches=89100
fs.file-max = 52706963
fs.nr_open = 52706963
vm.swappiness = 0
vm.overcommit_memory=1
kernel.panic=10
EOF

reboot

Haproxy節點設定

yum install haproxy -y

寫入以下設定到/etc/haproxy/haproxy.cfg

global
    log         127.0.0.1 local2
    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     6000
    user        haproxy
    group       haproxy
    daemon
    stats socket /var/lib/haproxy/stats

defaults
    mode                    tcp
    log                     global
    option                  tcplog
    option                  dontlognull
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

listen stats
    bind 0.0.0.0:9000
    mode  http
    stats uri /status
    stats refresh 30s
    stats realm "Haproxy Manager"
    stats auth admin:admin
    stats hide-version
    stats admin if TRUE


frontend  rke2-server
   bind *:9345
   mode tcp
   default_backend      rke2-server

backend   rke2-server
    balance     roundrobin
    mode        tcp
    server      rke2-master-default-nodepool-1 172.17.0.51:9345 check weight 1 maxconn 1000 check inter 2000 rise 2 fall 3
    server      rke2-master-default-nodepool-2 172.17.0.52:9345 check weight 1 maxconn 1000 check inter 2000 rise 2 fall 3
    server      rke2-master-default-nodepool-3 172.17.0.53:9345 check weight 1 maxconn 1000 check inter 2000 rise 2 fall 3


frontend  rke2-apiserver
   bind *:6443
   mode tcp
   default_backend      rke2-apiserver

backend   rke2-apiserver
    balance     roundrobin
    mode        tcp
    server      rke2-master-default-nodepool-1 172.17.0.51:6443 check weight 1 maxconn 1000 check inter 2000 rise 2 fall 3
    server      rke2-master-default-nodepool-2 172.17.0.52:6443 check weight 1 maxconn 1000 check inter 2000 rise 2 fall 3
    server      rke2-master-default-nodepool-3 172.17.0.53:6443 check weight 1 maxconn 1000 check inter 2000 rise 2 fall 3

啟動haproxy

systemctl enable --now haproxy.service

RKE2-Server初始化

在所有Master節點上執行資源下載以及安裝

groupadd -r etcd
useradd -r -g etcd -s /bin/false -d /var/lib/etcd etcd
mkdir -p /etc/rke2/config
curl -L https://storage.corpintra.plus/rke2/audit-policy.yaml -o /etc/rke2/config/audit-policy.yaml

cat > /etc/sysconfig/rke2-server <<EOF
CONTAINERD_HTTP_PROXY=http://192.168.1.10:3128
CONTAINERD_HTTPS_PROXY=http://192.168.1.10:3128
CONTAINERD_NO_PROXY=127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16,.svc,.cluster.local
EOF

mkdir /root/rke2-artifacts
cd /root/rke2-artifacts/
curl -LO  https://storage.corpintra.plus/rke2/v1.22.13+rke2r1/rke2-images.linux-amd64.tar.zst
curl -LO  https://storage.corpintra.plus/rke2/v1.22.13+rke2r1/rke2.linux-amd64.tar.gz
curl -LO  https://storage.corpintra.plus/rke2/v1.22.13+rke2r1/sha256sum-amd64.txt
curl -sfL https://storage.corpintra.plus/rke2/install.sh | INSTALL_RKE2_TYPE=server INSTALL_RKE2_MIRROR=cn INSTALL_RKE2_ARTIFACT_PATH=/root/rke2-artifacts INSTALL_RKE2_VERSION=v1.22.13+rke2r1 sh -

設定第一臺Master節點

常用的引數見: https://docs.rke2.io/install/install_options/server_config/
網路選擇: https://docs.rke2.io/install/network_options/
如果你想禁用一些RKE2自帶的Chart: https://docs.rke2.io/advanced/#disabling-server-charts

mkdir -p /etc/rancher/rke2
cat >  /etc/rancher/rke2/config.yaml <<EOF
write-kubeconfig-mode: "0644"
#server: https://172.17.0.50:9345 #等三臺都起來後把這個設定取消註釋，重啟下rke2-server
tls-san:
  - "127.0.0.1"
  - "172.17.0.50"
  - "172.17.0.51"
  - "172.17.0.52"
  - "172.17.0.53"
  - "rke2-master-default-loadblance"
  - "rke2-master-default-nodepool-1"
  - "rke2-master-default-nodepool-2"
  - "rke2-master-default-nodepool-3"
cni: "calico"
profile: "cis-1.6"
cluster-cidr: 10.244.0.0/16
service-cidr: 10.96.0.0/16
disable-cloud-controller: true
kube-proxy-arg:
- "proxy-mode=ipvs"
kubelet-arg:
- "max-pods=110"
node-taint:
- "node-role.kubernetes.io/control-plane=true:NoSchedule"
audit-policy-file: "/etc/rke2/config/audit-policy.yaml"
etcd-snapshot-schedule-cron: "0 */4 * * *"
etcd-snapshot-retention: "84"
#disable: 
#- "rke2-ingress-nginx"
#- "rke2-metrics-server"
EOF

啟動第一臺節點(需要耐心等一等,很慢，如果遇到啟動失敗的，重啟一次，一般重啟一次能解決 )

systemctl enable --now rke2-server.service

設定第二臺Master節點

mkdir -p /etc/rancher/rke2
cat >  /etc/rancher/rke2/config.yaml <<EOF
write-kubeconfig-mode: "0644"
token: <token for server node> ##填寫第一個server節點的token，通過在第一個master節點檢視/var/lib/rancher/rke2/server/token檔案獲得；
server: https://172.17.0.50:9345
tls-san:
  - "127.0.0.1"
  - "172.17.0.50"
  - "172.17.0.51"
  - "172.17.0.52"
  - "172.17.0.53"
  - "rke2-master-default-loadblance"
  - "rke2-master-default-nodepool-1"
  - "rke2-master-default-nodepool-2"
  - "rke2-master-default-nodepool-3"
cni: "calico"
profile: "cis-1.6"
cluster-cidr: 10.244.0.0/16
service-cidr: 10.96.0.0/16
disable-cloud-controller: true
kube-proxy-arg:
- "proxy-mode=ipvs"
kubelet-arg:
- "max-pods=110"
node-taint:
- "node-role.kubernetes.io/control-plane=true:NoSchedule"
audit-policy-file: "/etc/rke2/config/audit-policy.yaml"
etcd-snapshot-schedule-cron: "0 */4 * * *"
etcd-snapshot-retention: "84"
etcd-snapshot-dir: "/var/lib/etcd-snapshots"
#disable: 
#- "rke2-ingress-nginx"
#- "rke2-metrics-server"
EOF

啟動第二臺節點, 比較慢，耐心等等

systemctl enable --now rke2-server.service

設定第三臺Master節點

mkdir -p /etc/rancher/rke2
cat >  /etc/rancher/rke2/config.yaml <<EOF
write-kubeconfig-mode: "0644"
token: <token for server node> ##填寫第一個server節點的token，通過在第一個master節點檢視/var/lib/rancher/rke2/server/token檔案獲得；
server: https://172.17.0.50:9345
tls-san:
  - "127.0.0.1"
  - "172.17.0.50"
  - "172.17.0.51"
  - "172.17.0.52"
  - "172.17.0.53"
  - "rke2-master-default-loadblance"
  - "rke2-master-default-nodepool-1"
  - "rke2-master-default-nodepool-2"
  - "rke2-master-default-nodepool-3"
cni: "calico"
profile: "cis-1.6"
cluster-cidr: 10.244.0.0/16
service-cidr: 10.96.0.0/16
disable-cloud-controller: true
kube-proxy-arg:
- "proxy-mode=ipvs"
kubelet-arg:
- "max-pods=110"
node-taint:
- "node-role.kubernetes.io/control-plane=true:NoSchedule"
audit-policy-file: "/etc/rke2/config/audit-policy.yaml"
etcd-snapshot-schedule-cron: "0 */4 * * *"
etcd-snapshot-retention: "84"
etcd-snapshot-dir: "/var/lib/etcd-snapshots"
#disable: 
#- "rke2-ingress-nginx"
#- "rke2-metrics-server"
EOF

啟動第三臺節點, 比較慢，耐心等等

systemctl enable --now rke2-server.service

等所有Master節點起來後執行下面命令檢查

/var/lib/rancher/rke2/bin/kubectl --kubeconfig /etc/rancher/rke2/rke2.yaml get nodes -o wide

RKE2-Agent節點安裝

挨檯安裝Agent節點

cat > /etc/sysconfig/rke2-agent <<EOF
CONTAINERD_HTTP_PROXY=http://192.168.1.10:3128
CONTAINERD_HTTPS_PROXY=http://192.168.1.10:3128
CONTAINERD_NO_PROXY=127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16,.svc,.cluster.local
EOF


mkdir /root/rke2-artifacts
cd /root/rke2-artifacts/
curl -LO  https://storage.corpintra.plus/rke2/v1.22.13+rke2r1/rke2-images.linux-amd64.tar.zst
curl -LO  https://storage.corpintra.plus/rke2/v1.22.13+rke2r1/rke2.linux-amd64.tar.gz
curl -LO  https://storage.corpintra.plus/rke2/v1.22.13+rke2r1/sha256sum-amd64.txt
curl -sfL https://storage.corpintra.plus/rke2/install.sh | INSTALL_RKE2_TYPE=agent INSTALL_RKE2_MIRROR=cn INSTALL_RKE2_ARTIFACT_PATH=/root/rke2-artifacts INSTALL_RKE2_VERSION=v1.22.13+rke2r1 sh -

mkdir -p /etc/rancher/rke2
cat >  /etc/rancher/rke2/config.yaml <<EOF
server: https://172.17.0.50:9345
token: <token for server node> ##填寫第一個server節點的token，通過在第一個master節點檢視/var/lib/rancher/rke2/server/token檔案獲得；
cluster-cidr: 10.244.0.0/16
service-cidr: 10.96.0.0/16
kube-proxy-arg:
- "proxy-mode=ipvs"
kubelet-arg:
- "max-pods=110"
EOF


systemctl enable rke2-agent.service --now

等所有Node節點起來後執行下面命令檢查

/var/lib/rancher/rke2/bin/kubectl --kubeconfig /etc/rancher/rke2/rke2.yaml get nodes -o wide

RKE2預設使用containerd作為Runtime,如果想要檢視節點上執行的容器,可以使用下面的命令:

export CRI_CONFIG_FILE=/var/lib/rancher/rke2/agent/etc/crictl.yaml && /var/lib/rancher/rke2/bin/crictl ps

安裝儲存外掛(可選)

curl -LO https://storage.corpintra.plus/kubernetes/charts/csi-driver-smb-v1.9.0.tgz
helm upgrade csi-driver-smb \
   --namespace kube-system \
   --create-namespace \
   --debug \
   --wait \
   --install \
   --atomic \
   --set image.baseRepo="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage" \
   --set image.smb.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/smbplugin" \
   --set image.smb.tag="v1.9.0" \
   --set image.csiProvisioner.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/csi-provisioner" \
   --set image.csiProvisioner.tag="v3.2.0" \
   --set image.livenessProbe.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/livenessprobe" \
   --set image.livenessProbe.tag="v2.7.0" \
   --set image.nodeDriverRegistrar.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/csi-node-driver-registrar" \
   --set image.nodeDriverRegistrar.tag="v2.5.1" \
   --set controller.replicas=2 \
   ./csi-driver-smb-v1.9.0.tgz
   

   
curl -LO https://storage.corpintra.plus/kubernetes/charts/csi-driver-nfs-v4.1.0.tgz   
helm upgrade csi-driver-nfs \
   --namespace kube-system \
   --create-namespace \
   --debug \
   --wait \
   --install \
   --atomic \
   --set image.nfs.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/nfsplugin" \
   --set image.nfs.tag="v4.1.0" \
   --set image.csiProvisioner.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/csi-provisioner" \
   --set image.csiProvisioner.tag="v3.2.0" \
   --set image.livenessProbe.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/livenessprobe" \
   --set image.livenessProbe.tag="v2.7.0" \
   --set image.nodeDriverRegistrar.repository="registry.cn-hangzhou.aliyuncs.com/kube-sig-storage/csi-node-driver-registrar" \
   --set image.nodeDriverRegistrar.tag="v2.5.1" \
   --set controller.replicas=2 \
   ./csi-driver-nfs-v4.1.0.tgz